Table of Contents
Advertisement
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
Pressure Gauge
Sealant/Air Hose
Valve Stem
640
7. Press the inflator switch to turn on the
compressor.
u
The compressor starts injecting sealant
and air into the tire.
u
When the sealant injection is complete,
ON
continue to add air.
8.
Models with 265/45R20 104V tires
OFF
After the air pressure reaches front: 35 psi
(240 kPa)/rear: 32 psi (220 kPa), turn off
the kit.
Models without 265/45R20 104V tires
After the air pressure reaches 35 psi
(240kPa), turn off the kit.
u
To check the pressure, occasionally turn
off the compressor and read the gauge.
9. Unplug the power plug from the accessory
power socket.
10. Unscrew the sealant/air hose from the tire
valve stem. Reinstall the valve cap.
1Injecting Sealant and Air
If the required air pressure is not reached within 10
minutes, the tire may be too severely damaged for
the kit to provide the necessary seal, and your vehicle
will need to be towed.
See an Acura dealer for a replacement sealant bottle
and proper disposal of an empty bottle.
Advertisement
Chapters
Table of Contents
