Brightness Control - Acura MDX 2020 Owner's Manual

Brightness Control

+ ( Button
Button
( -
When the power mode is in ON, you can use
the + or - button to adjust instrument
( (
panel brightness.
Brighten: Press the + button.
(
Dim: Press the - button.
(
You will hear a beep when the brightness
reaches minimum or maximum. Several
seconds after adjusting the brightness, you
will be returned to the previous display.
■
Brightness level indicator
The brightness level is shown on the MID
while you are adjusting it.
uuOperating the Switches Around the Steering WheeluBrightness Control
1Brightness Control
The brightness of the instrument panel will be
reduced when the following conditions:
•
The power mode is in ON.
•
The light switch is in any position other than OFF
and it is dark outside.
To cancel the reduced instrument panel brightness
when the exterior lights are on, press the
until the brightness display is up to max, the beeper
sounds.
The brightness can be set differently for when the
exterior lights are on, and when they are off.
button
+ (
183