Acura MDX 2020 Owner's Manual page 308

uuAudio System Basic OperationuAndroid Auto
■
Auto Pairing Connection
When you connect an Android phone to the unit via the 2.5A USB port (
Android Auto is automatically initiated.
■
Enabling Android Auto
306
Enable Once: Allows only once. (Prompt
shows again next time.)
Always Enable: Allows anytime. (Prompt
does not show again.)
Cancel: Does not allow this consent.
You may change the consent settings under
the Smartphone Settings menu.
),
1Enabling Android Auto
Only initialize Android Auto when you are safely
parked. When Android Auto first detects your phone,
you will need to set up your phone so that auto
pairing is possible. Refer to the instruction manual
that came with your phone.
You can use the method below to change Android
Auto settings after you have completed the initial
setup:
Press the SETTINGSSelect Smartphone
SettingsAndroid Auto Device List
Use of user and vehicle information
The use and handling of user and vehicle information
transmitted to/from your phone by Android Auto is
governed by Google's Privacy Policy.