Acura MDX 2020 Owner's Manual page 630

uuIf a Tire Goes FlatuChanging a Flat Tire
■
Getting Ready to Replace the Flat Tire
Handle
Cargo Floor Box
Tool Case
628
1. Push the rear edge of the handle on the
floor lid and open the lid.
2. Take out the cargo floor box.
3. Take the jack, wheel nut wrench, and jack
handle bar out of the tool case.
1Changing a Flat Tire
NOTICE
Do not use the jack if it doesn't work properly. Call
your dealer or a professional towing service.
The wheel nut wrench supplied with your vehicle is
specially adapted to fit the holder shaft. Do not use
any other tool.
The subwoofer is located on the rear right side. Do
not store anything in this area. Doing so may
compromise vehicle audio performance.