Platform Access; Configure Hik-Connect - HIKVISION iDS-6700NXI-I/BA Series User Manual

2. Set protocol parameters.
Type
The network camera adopting custom protocol must support getting stream through
standard RTSP.
Path
Contact the manufacturer of network camera for the URL (Uniform Resource Locator) of
getting main stream and sub-stream.
Note
The protocol type and the transfer protocol must be supported by the network camera to add.
3. Click OK.
4. Click Custom Add to add cameras.
5. Set the parameters.
6. Click OK.

1.5 Platform Access

1.5.1 Configure Hik-Connect

Hik-Connect provides mobile phone application and platform service to access and manage your
video recorder, which enables you to get a convenient remote access to the surveillance system.
Steps
1. Go to System → Network → Advanced → Platform Access .
2. Check Enable to activate the function. Then the service terms will pop up.
Network Video Recorder User Manual
Figure 1-12 Protocol Management
11