Setting Up Network Access - HIKVISION DS-73 HQHI-SH Series Quick Start Manual

6. SETTING UP NETWORK ACCESS

Networking a DVR requires 3 steps:
1. Assign an IP address, Default Gateway, Subnet Mask, and a DNS server (NOTE:
DNS, not DDNS) to the DVR
2. Forward the appropriate ports on the router (Port Forwarding).
3. Register DDNS (DDNS registration is required only if the public IP address is Dynamic).
To assign an IP ADDRESS, go to "MENU">"SYSTEM CONFIGURATION">"NETWORK"
General
Select
NIC
Type
NETWORK
Sub Menu
IP CONFIGURATION
Please note that the DVR's default IP Address is
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
192.0.0.64
www.hikvision.com/en/us
Enable
DHCP
With DHCP
enabled,
the router
will assign
an IP
address to
the DVR