Sony WI-C300 Help Manual page 53

Click [Listen to Music].
3.
Hint
The above procedure is an example. For details, refer to the operating instructions supplied with your computer.
If the computer was connected with the headset the last time, an HFP/HSP connection is made when you turn on the headset.
While the headset is on, you can make an A2DP connection (music playback) by pressing the
Note
If the sound quality for music playback is low, make sure that the function that supports music playback connections (A2DP) is
available on your computer. For details, refer to the operating instructions supplied with your computer.
If the last-connected Bluetooth device is placed near the headset, the headset may connect automatically to the device by simply
turning on the headset. In this case, deactivate the Bluetooth function on the Bluetooth device or turn off the power.
If you cannot connect your computer to the headset, deactivate pairing on your computer and perform pairing again. For details,
refer to the operating instructions supplied with your computer.
In case that the pairing information for the headset has been deleted on the computer, the headset may go into pairing mode
when turning on the headset.
Related Topic
How to make a wireless connection to Bluetooth devices
Pairing and connecting with a computer (Windows 7)
Listening to music from a device via Bluetooth connection
Disconnecting Bluetooth connection (after use)
4-730-323-11(2) Copyright 2018 Sony Corporation
53
button.