Sony WI-C300 Help Manual page 55

Wireless stereo headset

Table of Contents

Hint

The above procedure is an example. For details, refer to the operating instructions supplied with your Bluetooth device.

To delete all pairing information, see

Note

If pairing is not established within about 5 minutes, pairing mode will be canceled and the headset will turn off. In this case, start

over from step 1.

Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases:

Pairing information has been deleted after repair, etc.

When a 9th device is paired.

The headset can be paired with up to 8 devices. If a new device is paired after 8 devices are already paired, the paired device

with the oldest connection time is replaced by the new one.

When the pairing information for the headset has been deleted from the Bluetooth device.

When the headset is initialized.

All pairing information is deleted. In this case, delete the pairing information of the headset from the Bluetooth device, and then

pair them again.

The headset can be paired with multiple devices, but can only play music from one paired device at a time.