Statistics Configuration; High Limits; Stack Limits; Anti-Condensation Configuration - Laars Neotherm NTH Installation And Operation Instruction Manual

Page 62

Statistics Configuration

8.G.9
The statistics configuration sub-menu allows the
installer to view Burner Cycles, Burner Run Time, DHW
Pump Cycles, Boiler Pump Cycles, and System Pump
Cycles.
This sub-menu is 'Read-Only'
8.G.10 High Limits
The outlet High limit can be adjusted using the installer
password. After a change is made, the control will
lockout and require a Safety Verification (see Section
8.3 for more details on Safety Verification).
8.G.11 Stack Limits
LAARS Heating Systems
8.G.12 Anti-Condensation Configuration
Anti-condensation (frost protection) is enabled/disabled
on this screen
8.G.13 Frost Protection
Frost protection will assist in keeping the unit from
freezing when the unit is not able to fire, but is still
able to run the pumps. The frost overrun time can be
changed on this screen.
8.G.14 System Configuration
The installer can set the control to display
temperature units in °F or °C, can adjust the anti
short -cycle time, the low fire cutoff time, burner
off inhibit time, and can set the time allowed for an
alarm to sound before being silenced.