Table of Contents
Advertisement
Vitocrossal 300, CA3B Series 2.5 to 6.0 Technical Data
Removing the Boiler Panels
1.
Remove the screws from the right side of the top
panels.
2.
Lift and remove the top right-side panels.
3.
Slide the top panels toward the right side and
remove.
4.
Lift and remove the top left side panels.
5.
Lift and remove the bottom left side panels.
6.
Tilt forward, lift and remove lower front panel.
7.
Remove the screws from the lower front cover plate
and remove plate.
8.
Lift and remove the top front panel.
9.
Remove the screws from the top front cover plate
and remove plate.
10. Protect jacketing from damage while they are set
aside.
Note: The Vitocrossal 300, CA3B having two boiler
heat exchanger sections will have reduced number
of disassembly steps compared to a
Vitocrossal 300, CA3B having three boiler heat
exchanger sections.
Disassembly
15
Advertisement
Table of Contents
