Table of Contents
Advertisement
GS-SR125E System Installation Guide
5.12. Floppy Drive Installation (Optional)
Step 1. Remove three screws on the front top cover, (Fig-28)
Push down the two buttons located at two sides of the system to
remove front top cover. (Follow the arrow direction shown in Fig-
29)
Figure 27
Step 2. Insert the floppy disk drive into the tray. Secure the floppy
disk drive with screws (Fig-30). Connect cables to the floppy disk
drive. (Fig-31)
Figure 29
28
Figure 28
Figure 30
Advertisement
Table of Contents
