Remove The Pool Cleaner From The Water - Maytronics Dolphin S400 User Instructions

5.4 Remove the Pool Cleaner from the Water

Option A
The easiest and most fun way to get the robot out of the water:
1. Log into the MyDolphin™ Plus app and click "Pick-up mode".
2. The robot will reach the wall closest to it, and will rise, and will wait for 3 minutes above the
water surface.
3. Grab the robot by the handle and pull it out the water.
Option B
5.4.1
5.4.2
Using the blue cable, bring the Pool Cleaner to the
pool edge.
Use the handle to remove the Pool Cleaner from the pool.
5.4.3 Place the Pool Cleaner on the edge of the pool to let the water drain out.
Top 10 / S400
User Instructions
|
Turn OFF the power supply.
WARNING
Please use the cable to pull the robot to the surface, then use
the handle.
WARNING
7