Advertisement
Icemaker & Adaptor Hold-Down Kit Installation Instructions
2.
Locate the two right and left side hold down brackets, shown in Figure 2. These are the brackets with the
bent flange on them.
3.
There are two options for installing the brackets, outside of the side panels or behind the side panels, as
shown in Figure 3. Left side of unit is shown in Figure 3.
4.
Place the bracket over the adapter lid then re-install the black screws that were removed in Step 1.
Publication Number: 629096853INS
Side Panel
Screws
Figure 1
Left Side
Right Side
Figure 2
Figure 3
- 2 -
Straight Edge Goes
to the Rear of the
Dispenser
© 2008, IMI Cornelius Inc.
Advertisement
