Disassemble front case
Unclench 3 screw covers;then unscrew 6 screws and lift
it backward.
(Refer to figure 7-4)
Disassemble electrical box cover
Unscrew the srew fixing the display board and take the
board off.Hold the cover and press it to loosen the hook.
lift it upward and remove the box cover
(Refer to figure 7-5)
Disassemble electrical box
disassemble the grounding nut on evaporator;take away tube sensor
unplug the connecting terminal for indoor fan motor and stepping motor
Unscrew the screw fixing electrical box.Take out it.
(Refer to figure 7-6)
screws
display board
tube sensor
grounding nut
ambient sensor
-16-
screws
electrical box cover
hook