Table of Contents
Advertisement
Childproof lock
en
To check the values for the different time-setting
options, touch the
button repeatedly until the
v
required symbol is indicated.
Setting the timer
The timer runs alongside other settings.You can set it at
any time, even if the appliance has been switched off. It
has its own audible signal so that you can tell whether it
is the timer duration or a cooking time that has elapsed.
The maximum time that can be set is 23 hours and 59
minutes. Up to 10 minutes, the timer duration can be
set in 30-second increments.Above 10 minutes, the
time increments become longer the higher the value.
The timer duration will start at a different default value,
depending on which button you touch first:
5 minutes if you touch the
you touch the
button.
@
Touch the
button until the timer symbol
v
1.
highlighted.
Use the
or
button to set the timer duration.
A
@
2.
After a few seconds, the timer duration will start to
count down.
If the set timer duration is the duration for which
Tip:
you wish to cook your food, use the cooking time. The
appliance will then switch off automatically when it has
finished cooking.
The timer duration has elapsed
An audible signal will sound. The timer duration will be
zero on the display.
Touch any button to switch off the timer.
Changing and cancelling
You can use the
or
A
@
duration at any time. After a few seconds, the change
will be applied.
To cancel, use the
button to reset the timer duration
A
all the way to zero. The timer is now switched off.
Checking time-setting options
If time-setting options have been set, the corresponding
symbols are lit up on the display. The symbol for which
the time is currently being displayed will be indicated.
To check the values for the different time-setting
options, touch the
button repeatedly until the
v
required symbol is indicated.
Setting the time
Once the appliance has been connected to the mains
or following a power failure, the clock will flash on the
display. Set the time.
The function selector must be set to the "Off" position.
Use the
A
or
@
button to set the time.
1.
The time will stop flashing.
Confirm by pressing the
2.
The appliance will apply the time you have set.
14
A
button and 10 minutes if
V
button to change the timer
button.
v
You can go to the basic settings to specify
Note:
whether or not the time should be shown on the display.
~ "Basic settings" on page 15
Changing the time
You can change the time again when you need to, e.g.
from summer to winter time.
To do this, when the appliance is switched off, touch the
button until the symbol for the time is underlined,
v
and use the
AChildproof lock
Y our appliance is equipped with a childproof lock so
C h i l d p r o o f l o c k
that children cannot switch it on accidentally or change
any settings.
is
Notes
You can go to the basic settings to specify whether
■
you want the option to set the childproof lock.
~ "Basic settings" on page 15
If a hob is connected, it will not be affected by the
■
childproof lock on the oven.
After a power cut, the childproof lock will no longer
■
be active.
Activating and deactivating
To activate the childproof lock, the function selector
must be set to the "Off" position.
Press and hold the
The symbol for this function will appear on the display.
The childproof lock is now activated.
If a timer duration
Note:
continue to count down. While the childproof lock is
active, the timer duration cannot be changed.
To deactivate the childproof lock, press and hold the
button again for approx. 4 seconds until the symbol
'
goes out on the display.
or
button to change the time.
A
@
button for approx. 4 seconds.
'
has been set, this will
V
Advertisement
Table of Contents
