F
Further technical information can be found in the Schmersal catalogues or in the online catalogue on the Internet:
products.schmersal.com.
2 Product description
2.1 Ordering code
Product type description:
RSS 36 (1)-(2)-(3)-(4)
(1)
without
I1
I2
(2)
without
D
SD
(3)
without
R
(4)
ST
ST5
2.2 Special versions
For special versions, which are not listed in the ordering code, these specifications apply accordingly, provided that
they correspond to the standard version.
2.3 Purpose
This non-contact, electronic safety sensor is designed for application in safety circuits and is used for monitoring the
position of movable safety guards. In this application, the safety sensor monitors the position of hinged, sliding or
removable safety guards by means of the coded electronic actuator.
Standard coding
Individual coding
Individual coding, re-teaching enabled
without diagnostic function (only on request for ST5)
With diagnostic output
with serial diagnostics (only for ST)
without latching
with latching, latching force approx. 18 N
Connector plug M12, 8-pole
Connector plug M12, 5-pole