Switch Distance - schmersal RSS 36-D-ST5 Manual

Set of disposable screws (order separately)
- 4x M4x25 incl. washers, order number 101217746
- 4x M4x30 incl. washers, Bestellnummer 101217747
Sealing kit (order separately)
- Order number 101215048
- 8 plugs and 4 under seals
- To seal the mounting holes and as a spacer (approx. 3 mm) to facilitate cleaning below the mounting surface
- Also suitable as tamper protection for the screw attachment

4.4 Switch distance

Switching distances in mm to IEC 60947-5-3
Typical switching distance s
Assured switching distance s
Assured switch-off distance s
There are new switch distances as per the table below owing to the necessity of technical modifications (V2).
2
Please check the design of your guard system following installation to ensure adherence to the secured switch distances (≤
s and ≥ s
ao ar
The positions of the designations V2 should be gleaned from the dimensional drawings.
:
typ
:
ao
:
ar
) in accordance with the specified values and adjust the guard system accordingly.
12
10
20