Page 1
Camera Connection and Configuration Notes ..6 SightLine Software Requirements ......1 Tenum 640 Configuration Notes - 4000-OEM ..6 1750-OEM DRS Camera Bench Setup ....2 Tamarisk Camera with Superframe Configuration Notes ..............6 4000-OEM DRS Camera Bench Setup ....3 Serial Passthrough ..........
Page 2
EAN-DRS-Cameras 1 Overview This document describes how to configure the SightLine OEM video processing boards to receive video from DRS cameras. camera configuration tables for the complete list of supported DRS cameras. Before connecting with the Panel Plus software, the OEM board should be powered up and connected...
Page 3
(J11) Under Board (optional) Serial Debug (J9) A green light (D2) on the 1750-OEM indicates that all boards are powered on. An amber light (D1) verifies network connection. Cables and PWR: SLA-CAB-FPC04: 39-position FPC cable, 4.00-inch. See FPC cable instructions and precautions before connecting.
Page 8
EAN-DRS-Cameras 6.3 Serial Passthrough Serial passthrough is supported by the SightLine OEM boards to allow connection to the camera from a network controlling host. Serial Passthrough for the Tamarisk cameras defaults to: Baud: 57600 Data Bits: 8 Stop Bits: 1 Parity: None ...
Need help?
Do you have a question about the 1750-OEM and is the answer not in the manual?
Questions and answers