1. Manuals
  2. Brands
  3. SightLine Manuals
  4. Computer Hardware
  5. 1750-OEM
  6. Startup manual

SightLine 1750-OEM Startup Manual

Hide thumbs Also See for 1750-OEM:
Table of Contents

Advertisement

Quick Links

Download this manual
EAN-Startup Guide 1750-OEM - PRELIMINARY
2023-04-27
Exports:
Export Summary Sheet
EULA:
End User License Agreement
Web:
sightlineapplications.com
1
Overview............................................................. 1
1.1
Additional Support Documentation ................... 1
1.2
SightLine Software Requirements ...................... 1
2
Safe Device Handling .......................................... 1
3
1750-EVAL Kit ..................................................... 1
4
Hardware Bench Setup ...................................... 2
4.1
5
Network Configuration ....................................... 3
5.1
6
Serial Communications ....................................... 4
6.1
6.2
USB Device Driver ............................................... 5
CAUTION: Alerts to a potential hazard that may result in personal injury, or an unsafe practice that causes damage to the equipment
if not avoided.
IMPORTANT: Identifies crucial information that is important to setup and configuration procedures.
Used to emphasize points or reminds the user of something. Supplementary information that aids in the use or understanding of the
equipment or subject that is not critical to system use.
© SightLine Applications, Inc.
Sales:
sales@sightlineapplications.com
Support:
support@sightlineapplications.com
7
Panel Plus ........................................................... 5
7.1
Camera Acquisition ............................................ 7
7.2
Stream Network Video to This PC ...................... 8
8
Summary ............................................................ 8
8.1
Demo Mode........................................................ 9
9
Modifying Encoder Parameters ........................ 10
10
Troubleshooting ............................................... 11
10.1
10.2
MIPI-IN Kit) ....................................................... 13
10.3
Questions and Additional Support ................... 13
Phone: +1 (541) 716-5137

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1750-OEM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SightLine 1750-OEM

Summary of Contents for SightLine 1750-OEM

  • Page 1: Table Of Contents

    Modifying Encoder Parameters ......10 Additional SightLine Adapter Boards ....3 Troubleshooting ..........11 Network Configuration ........3 10.1 Send Diagnostic Files to SightLine Support ..12 Static IP Configuration Through Ethernet ..4 10.2 Nonfunctional SLA-4000-MIPI-IN Board (4000- Serial Communications ........4 MIPI-IN Kit) ............

  • Page 2: Overview

    EAN- Startup Guide 1750-OEM 1 Overview This Startup Guide provides the steps for connecting, configuring, and testing the 1750-OEM video processing board. The 1750-OEM board provides the standard connections for power and communication as well as general purpose IO and camera connections.

  • Page 3: Hardware Bench Setup

    • Configuration. Power and network connectivity LEDs: A green light (D2) on the 1750-OEM indicates that all boards are powered on. An amber light (D1) • verifies network connection. To prevent voltage spikes to the board, plug in the power adapter to an AC power source first and •...

  • Page 4: Additional Sightline Adapter Boards

    *SLA-CAB-MIPI-02 FFC cable must be connected correctly. See FFC cable instructions before connecting the SLA-4000-MIPI board. **SLA-CAB-0305 can connect to SLA-CAB-1404 to facilitate a PC/USB connection to serial port 0 on the 1750-OEM. See the Serial Communications section for more information.

  • Page 5: Static Ip Configuration Through Ethernet

    Static IP Configuration Through Ethernet 1. Connect the board to a DHCP network. 2. Apply power to the 1750-OEM and wait for the board to receive an address from the DHCP server. 3. Connect to the board in Panel Plus.

  • Page 6: Direct Serial Connection (Optional)

    This section covers the Panel Plus setup and configuration process. Panel Plus provides a basic graphical interface to the 1750-OEM board. Before connecting with the Panel Plus software, the 1750-OEM board should be powered up and connected through: a network switch or directly to the host PC (preferred) or, Direct serial connection (for troubleshooting or if a network connection cannot be established).
  • Page 7 PRELIMINARY DRAFT EAN- Startup Guide 1750-OEM C:\Program Files (x86)\sightline applications\sla-panel-plus 3.06.02\slapanelplus.exe Figure 6: Windows Security Alert Prompt  IMPORTANT: Do not cancel this prompt. Failure to allow access at this point will not allow the Panel Plus • application to connect to the board. See the Troubleshooting section for more information.

  • Page 8: Camera Acquisition

    PRELIMINARY DRAFT EAN- Startup Guide 1750-OEM 5. Verify the connection. When Panel Plus has successfully connected to the 1750-OEM board, operating information is displayed under the Video Operating Firmware Ver: 3.6.2.30 FGPA: 00:00, HW Rev:02, temp: 125°F [37°C] information SVN Revision: 73601, Build Date: 06-Mar-2013, Build Time: 11:16:42...

  • Page 9: Stream Network Video To This Pc

    If the board has been connected to a camera and encoding functions are part of the configuration, video will be displayed in the main window. On the Connect tab of Panel Plus, the purchased/enabled functions are checked. To add additional features to 1750-OEM, contact Sales. ...

  • Page 10: Demo Mode

    Figure 11: Panel Plus Connection to Board  IMPORTANT: Not all 1750-OEM purchased configurations include encoded IP video. For configurations that include encoding, video will be displayed in the Panel Plus main window. Tracker-only configurations will display processed video on the HDMI output only. An HDMI- capable monitor is required for viewing this output.

  • Page 11: Modifying Encoder Parameters

    PRELIMINARY DRAFT EAN- Startup Guide 1750-OEM 9 Modifying Encoder Parameters The encoder parameters can be modified from the Compress tab in Panel Plus. The H.264 encoding option is a • good choice to get started. In the Output Properties section, •...

  • Page 12: Troubleshooting

    PRELIMINARY DRAFT EAN- Startup Guide 1750-OEM 10 Troubleshooting Issue: Unable to connect with the Panel Plus application to the 1750-OEM over a standard network connection. Check static IP address: Check the static IP address configuration. Improper or unknown static IP address setup is a common connection problem.

  • Page 13: Send Diagnostic Files To Sightline Support

     Connecting to the serial port on the 1750-OEM board from a host PC requires TTL (3.3V) to USB serial cable w/ 3-pin Molex cable (SLA-CAB-0305). 10.1 Send Diagnostic Files to SightLine Support In the event of a system malfunction or other issue, use the Get Diagnostic Files feature in the SightLine upgrade utility application to download files and then send them to Support.

  • Page 14: Nonfunctional Sla-4000-Mipi-In Board (4000-Mipi-In Kit)

    Figure 16: I2C Bus 3 Detect with Tera Term 4. If nothing shows up using I2C Bus 3 detect, check the SLA-CAB-MIPI-02 cable connection between the SLA-4000-IN MIPI board and the 1750-OEM, and then repeat steps 1 through 3. ...

Table of Contents