Table of Contents
Advertisement
Quick Links
EAN-DRS Cameras
2022-10-26
Exports:
Export Summary Sheet
EULA:
End User License Agreement
Web:
sightlineapplications.com
1
Overview ................................................................ 1
1.1
Additional Support Documentation ....................... 1
1.2
SightLine Software Requirements .......................... 1
1.2.1 FPGA - 1500-OEM .................................................. 1
2
Safe Device Handling .............................................. 1
3
Interface Boards and Adapters .............................. 2
4
Hardware Connections........................................... 2
4.1
1500-OEM DRS Camera Bench Setup .................... 2
4.2
3000-OEM DRS Camera Bench Setup .................... 3
CAUTION: Alerts to a potential hazard that may result in personal injury, or an unsafe practice that causes damage to the equipment
if not avoided.
IMPORTANT: Identifies crucial information that is important to setup and configuration procedures.
Used to emphasize points or reminds the user of something. Supplementary information that aids in the use or understanding of the
equipment or subject that is not critical to system use.
© SightLine Applications, Inc.
Sales:
sales@sightlineapplications.com
Support:
support@sightlineapplications.com
4.3
4000-OEM DRS Camera Bench Setup .................... 4
5
Configuration Settings ........................................... 5
5.1
Acquisition Settings................................................ 5
5.2
Tenum 640 Configuration Notes - 4000-OEM ....... 6
5.3
Notes ...................................................................... 6
5.4
Serial Passthrough ................................................. 6
6
Questions and Additional Support ......................... 7
Phone: +1 (541) 716-5137
Advertisement
Table of Contents
Related Manuals for SightLine 1500-0EM
Summary of Contents for SightLine 1500-0EM
-
Page 1: Table Of Contents
Overview ..............1 4000-OEM DRS Camera Bench Setup ....4 Additional Support Documentation ....... 1 Configuration Settings ........... 5 SightLine Software Requirements ......1 Acquisition Settings..........5 1.2.1 FPGA - 1500-OEM ..........1 Tenum 640 Configuration Notes - 4000-OEM ..6 Safe Device Handling .......... -
Page 2: Overview
EAN-DRS-Cameras 1 Overview This document describes how to configure the SightLine OEM video processing boards to receive video from DRS cameras. See EAN-Camera-Compatibility for the complete list of supported DRS cameras. SightLine OEM boards configured in this document: 1500-0EM, 3000-OEM, 4000-OEM. -
Page 3: Interface Boards And Adapters
IMPORTANT: Disconnect all input power to OEMs and adapter PWR Switch RJ45 Ethernet boards before connecting or to OEM disconnecting cables. SLA-PWR-B05V Network Switch or PC Direct Serial 0 Figure 2: 1500-OEM Tamarisk Camera Bench Setup © SightLine Applications, Inc. -
Page 4: 3000-Oem Drs Camera Bench Setup
Network Switch or SLA-CAB-1504 (J9) disconnecting cables. PC Direct SLA-3000-mIO Analog on J1 Monitor (optional) SLA-3000-OEM + Serial (0) SLA-3000-mIO+ SLA-3000-FPC DRS Cameras with SLA-3000-FPC SLA-FPC-DRS on J4 SLA-CAB-FPC04 Figure 3: 3000-OEM DRS Camera Bench Setup © SightLine Applications, Inc. -
Page 5: 4000-Oem Drs Camera Bench Setup
FFC cable instructions before connecting the SLA-4000-MIPI board. **SLA-CAB-0305 can connect to SLA-CAB-0804 to facilitate a PC/USB connection to serial port 0 on the 4000-OEM. See the Serial Communications section in the EAN-Startup-Guide-4000-OEM for more information. © SightLine Applications, Inc. -
Page 6: Configuration Settings
IMPORTANT: This procedure assumes that the customer has read the OEM startup guide(s) and has a basic understanding of the following fundamentals: Completed a functional connection between the SightLine video processing board and Panel • Plus application. Familiar with Panel Plus controls. -
Page 7: Tenum 640 Configuration Notes - 4000-Oem
To get Celsius, use the 16-bit pixel value as the integer, divide by 32.0F, and then subtract 273.15. • 5.4 Serial Passthrough Serial passthrough is supported by the SightLine OEM boards to allow connection to the camera from a network controlling host. Serial Passthrough for the Tamarisk cameras defaults to: Baud: 57600 Data Bits: 8... -
Page 8: Questions And Additional Support
EAN-DRS-Cameras 6 Questions and Additional Support For questions and additional support, please contact SightLine Support. Additional support documentation and Engineering Application Notes (EANs) can be found on the Documentation page of the SightLine Applications website. © SightLine Applications, Inc.
Need help?
Do you have a question about the 1500-0EM and is the answer not in the manual?
Questions and answers