1. Manuals
  2. Brands
  3. SightLine Manuals
  4. Media Converter
  5. 3000-OEM
  6. Startup manual

SightLine 3000-OEM Startup Manual

Video processing board
Hide thumbs Also See for 3000-OEM:
Table of Contents

Advertisement

Quick Links

Download this manual
EAN- Startup Guide 3000-OEM
2020-11-03
Exports:
Export Summary Sheet
EULA:
End User License Agreement
Web:
sightlineapplications.com
1
Overview ................................................................ 1
1.1
Additional Support Documentation ....................... 1
1.2
SightLine Software Requirements .......................... 1
2
Network Configuration .......................................... 1
3
Serial Communications .......................................... 2
4
3000-EVAL Kit ......................................................... 2
5
Hardware Bench Setup .......................................... 3
5.1
Additional SightLine Adapter Boards ..................... 4
CAUTION: Alerts to a potential hazard that may result in personal injury, or an unsafe practice that causes damage to the equipment
if not avoided
IMPORTANT: Identifies crucial information that is important to setup and configuration procedures.
Used to emphasize points or reminds the user of something. Supplementary information that aids in the use or understanding of the
equipment or subject that is not critical to system use.
© SightLine Applications, Inc.
Sales:
sales@sightlineapplications.com
Support:
support@sightlineapplications.com
6
Panel Plus ............................................................... 4
6.1
6.2
Direct Serial Connection (optional) ........................ 9
7
Summary ................................................................ 9
7.1
Demo Mode ......................................................... 10
8
Troubleshooting ................................................... 10
8.1
Questions and Additional Support ....................... 12
Phone: +1 (541) 716-5137

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3000-OEM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SightLine 3000-OEM

Summary of Contents for SightLine 3000-OEM

  • Page 1: Table Of Contents

    Hardware Bench Setup .......... 3 Questions and Additional Support ....... 12 Additional SightLine Adapter Boards ..... 4  CAUTION: Alerts to a potential hazard that may result in personal injury, or an unsafe practice that causes damage to the equipment if not avoided ...

  • Page 2: Overview

    2 Network Configuration The 3000-OEM board can be connected directly to the host PC or through a network switch. During startup, the board sends three DHCP discover requests in three second intervals. It will self-assign the link-local address of 169.254.1.181 if it does not receive a response.

  • Page 3: Serial Communications

    Figure 2: Serial COM and Power Connection 4 3000-EVAL Kit Parts listed below are included in the 3000-OEM kit. If your application calls for other options and interface boards please contact Sales. To review all the interface board options, see the...

  • Page 4: Hardware Bench Setup

    SLA-PWR-C12V: Connects to J5 on SLA-3000-IO board and AC power source. • Power and network connectivity LEDs: A green light (LED D2) on the 3000-IO indicates that all boards are powered on. An amber light (LED • D3) on the 3000-OEM verifies network connection. Optional Analog HDMI Out SLA-CAB-SMA2BNC...

  • Page 5: Additional Sightline Adapter Boards

    SightLine adapter boards provide different I/O, camera inputs, or digital outputs. The boards can be attached directly to the 3000-OEM or through a secondary adapter allowing customers to swap out modules for custom configurations. This setup guide assumes the initial use of the EVAL kit and the HDSDI input.
  • Page 6 EAN-3000-OEM Startup Guide Figure 5: Windows Security Alert Prompt  IMPORTANT: Do not cancel this prompt. Failure to allow access at this point will not allow the Panel Plus • application to connect to the board. See the Troubleshooting section for more information.
  • Page 7 EAN-3000-OEM Startup Guide 5. Verify the connection: a. When the Panel Plus has connected to the 4000-OEM board, the firmware version and the enabled features will be displayed in the Connect tab. Appbit code with listed features Figure 7: Firmware Version and Enabled Features b.

  • Page 8: Camera Setup And Network Selection

    EAN-3000-OEM Startup Guide 6. Select the Compression tab: a. Use the H.264 encoding options to get started. b. In the Output Properties section, use the default values for Frame Step and Down Sample. c. In the Streaming parameters section, define the destination IP address and port.
  • Page 9 After the system reboots reconnect to the board. Make sure the board connects.  EAN-Camera Compatibility for all third-party cameras and lens assemblies that are currently supported by SightLine software. Includes configuration and setting support guidance. 6. From the Connection tab, click Stream Network Video to This PC. © SightLine Applications, Inc.

  • Page 10: Direct Serial Connection (Optional)

    4. Click the Disconnected (click to connect) button. 7 Summary This completes the startup guide for the 3000-OEM board. See the Panel Plus User Guide (main menu » Help » User Guide) for additional user and setup information. If the board has been connected to a camera and encoding functions are part of the configuration, video will be displayed in the main window.

  • Page 11: Demo Mode

    The video screen will have a Demo Mode screen overlay until the Demo Mode function is turned off. 8 Troubleshooting Issue: Unable to connect with the Panel Plus application to the 3000-OEM board over a standard network connection. Check static IP address: Check the static IP address configuration.
  • Page 12 The Panel Plus software will automatically recognize serial ports and list them in the dropdown menu for available connections.  Connecting to the serial COM port on the 3000-OEM board from a host PC requires a null modem adapter or null modem serial cable. Check network configuration: After communications have been established using the serial connection, networking settings can be corrected to allow proper network communications.

  • Page 13: Questions And Additional Support

    4. Move the joystick right or left to select 1080P30 8.1 Questions and Additional Support For questions and additional support, please contact Support. Additional support documentation and Engineering Application Notes (EANs) can be found on the Documentation page of the SightLine Applications website. © SightLine Applications, Inc.

Table of Contents