1. Manuals
  2. Brands
  3. SightLine Manuals
  4. Computer Hardware
  5. ICD-1750-OEM
  6. Quick start manual

SightLine ICD-1750-OEM Quick Start Manual

Hide thumbs Also See for ICD-1750-OEM:
Table of Contents

Advertisement

Quick Links

Download this manual
ICD-1750-OEM
2023-08-22
Exports:
Export Summary Sheet
EULA:
End User License Agreement
Web:
sightlineapplications.com
1
Overview ................................................................ 1
1.1
Additional Support Documentation ....................... 1
1.2
Sightline Software Requirements .......................... 1
2
Safe Device Handling .............................................. 1
3
1750-OEM Overview .............................................. 1
3.1
1750-OEM Specifications ....................................... 2
3.2
Interface Protocol .................................................. 2
3.3
Functional Block Diagram ...................................... 2
3.4
Comms Block Diagram ........................................... 3
3.5
Customer Integration - Key Points ......................... 3
4
Thermal Management ........................................... 3
4.1
Heatsink Guidelines ............................................... 3
4.2
Gap Pads ................................................................ 4
5
Connector Descriptions .......................................... 4
5.1
5.2
Connector J4: LVDS ................................................ 5
5.3
Connector J5: USB 3.0 ............................................ 6
5.4
5.5
5.6
Connector J9: Debug Serial Port............................ 8
CAUTION: Alerts to a potential hazard that may result in personal injury, or an unsafe practice that causes damage to the equipment
if not avoided.
IMPORTANT: Identifies crucial information that is important to setup and configuration procedures.
Used to emphasize points or remind the user of something. Supplementary information aids in the use or understanding of the
equipment or subject, which is not critical to system use.
©SightLine Applications, LLC
Sales:
sales@sightlineapplications.com
Support:
support@sightlineapplications.com
5.7
Connector) ............................................................. 8
5.8
5.9
Connector J13: MicroSD......................................... 9
Connectors ............................................................. 9
6
Additional I/O ......................................................... 9
6.1
LED Summary ......................................................... 9
6.2
Serial and I2C Ports ................................................ 9
7
Interface ............................................................... 11
8
GPIO ..................................................................... 11
8.1
Advanced GPIO .................................................... 12
9
Camera Naming Convention ................................ 12
10
Video Input Port J6 Details (Cam 0) ..................... 13
11
MIPI Port J8 (Cam 1) ............................................ 13
12
Questions and Additional Support ....................... 13
Phone: +1 (541) 716-5137

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ICD-1750-OEM and is the answer not in the manual?

Questions and answers

durga madhavi duvva
July 1, 2025

can i get the processed video output from video engine 1750-oem through ethernet

0

Subscribe to Our Youtube Channel

Related Manuals for SightLine ICD-1750-OEM

Summary of Contents for SightLine ICD-1750-OEM

  • Page 1: Table Of Contents

    Connector J10: HDMI Output Video (FFC Connector) ............. 8 Additional Support Documentation ....... 1 Connector J11: Real Time Clock Power In ....8 Sightline Software Requirements ......1 Connector J13: MicroSD......... 9 Safe Device Handling ..........1 5.10 Connectors P1 and P2: i.MX8M Plus SOM 1750-OEM Overview ..........
  • Page 2 ICD-1750-OEM Revision History Date Description 2023-08-15 Updated Serial Port Summary table to show hardware and serial port name relationship. 2023-08-08 Corrected MIPI board and port reference in Serial Port Summary table. 2023-07-25 Updated Serial Port and I2C Speed and Data Limits section.

  • Page 3: Overview

    Describes power requirements, thermal management, interface specifications, and connector pinouts for the 1750-OEM video processing board.  CAUTION: Any customer modifications to SightLine OEM and adapter boards will void the warranty and can potentially damage the board. Before attempting any modifications, please contact SightLine Support.

  • Page 4: 1750-Oem Specifications

    All 1750-OEM board mounting holes support M2 screws (0.086 dia.). 3.2 Interface Protocol The 1750-OEM shares the same interface protocol as other SightLine video processing boards. The protocol is a packet-based command and control interface. The protocol document is available from the SightLine website.

  • Page 5: Comms Block Diagram

    ✓ For in-system recovery, it is recommended to expose the USB programming/debugging port to a system accessible connector. ✓ If you are designing a custom system interface board with the 1750-SOM contact SightLine Hardware Engineering prior to design for assistance.

  • Page 6: Gap Pads

    *The debug serial port is exposed on J9 should be reserved for debugging only. Debug serial port is 3.3V TTL. SLA-CAB-USBC-FPC is a directional cable and must be connected correctly. End (A) connects to 1750-OEM on (J5). End (C) connects to the SLA- FPC-USB-C adapter board. See the SLA-FPC-USB-C section in ICD-Adapter-Boards for more information © SightLine Applications, LLC...

  • Page 7: Connector J1: Power, Comms, Ethernet

    5V POWER OUT RX_N UART RX NEGATIVE LEG AT LVDS LEVEL RX_P UART RX POSITIVE LEG AT LVDS LEVEL GROUND GROUND TX_N UART TX NEGATIVE LEG AT LVDS LEVEL TX_P UART TX POSITIVE LEG AT LVDS LEVEL © SightLine Applications, LLC...

  • Page 8: Connector J5: Usb 3.0

    Y4, G12 VIN_D13 Y5, G13 VIN_D10 Y2, G10 VIN_D11 Y3, G11 VIN_D8 Y0, G8 VIN_D9 Y1, G9 Ground Ground VIN_D6 CbCr6, G6 VIN_D7 CbCr7, G7 VIN_D4 CbCr4, G4 VIN_D5 CbCr5, G5 VIN_D2 CbCr2, G2 VIN_D3 CbCr3, G3 © SightLine Applications, LLC...

  • Page 9: Connector J8: Mipi Port (Ffc Connector)

    I C. For details on supported MIPI cameras and formats see EAN-MIPI-Cameras. The MIPI port can also be used to connect SightLine video input adapter boards through the 400-MIPI-IN adapter board. For more information see ICD-Adapter-Boards.

  • Page 10: Connector J9: Debug Serial Port

    Table 7: Extra Serial/GPIO Signal Description UART2_TXD 3.3V TTL DEBUG UART UART2_RXD 3.3V TTL DEBUG UART 5.7 Connector J10: HDMI Output Video (FFC Connector) Connector: Amphenol 20POS, 62674-201121ALF Mates with: Sightline Cable SLA-CAB-HD10 Table 8: HDMI Description Description HDMI_C_5VOUT* HDMI_C_5VOUT* HDMI_DDC_SDA_5V HDMI_C_HPD_5V HDMI_CEC_3V3...

  • Page 11: Connector J13: Microsd

    6.2 Serial and I2C Ports All serial ports are 3.3V TTL. When using a SightLine adapter board with a 3-pin connector, use the CAB- 03xx for easy break out to either a pig tail, Molex-to-Molex, or DB-9 connector. Table 10: 1750-OEM Serial Port Summary...

  • Page 12: Serial Ports Software Cross Reference

    Table 13: Serial Ports Software Cross Reference - 1750-OEM Connector Serial Port Name Linux Location Cases* Cam ID /dev/ttymxc0 or SightLine Video Protocol (SVP) / other protocol Serial 0 /dev/ttySLA_00 types / user defined / other /dev/ttymxc1 or Serial 1 Debug port...

  • Page 13: I.mx 8M Plus Applications Processor Mipi Interface

    J6. One GPIO can be exposed to the round wire connector J1 by modifying resistor placements on the PCB. Four of the six GPIOS that are routed to the adapter board are used by SightLine software to detect the adapter board ID. On some adapter boards the remaining two GPIOs are exposed to round wire connectors for customer use.

  • Page 14: Advanced Gpio

    9 Camera Naming Convention Connector: Appears in software as: J6 (3000-Adapter board 80 Pin) Camera 0 (Cam 0) J8 (MIPI - 28 pin Basler style) Camera 1 (Cam 1) J5 USB3 (USB camera) Camera 2 (Cam 2) © SightLine Applications, LLC...

  • Page 15: Video Input Port J6 Details (Cam 0)

    I2C. For details on supported MIPI cameras and formats see EAN-MIPI-Cameras. The MIPI port can also be used to connect SightLine Video Input adapter boards through the 4000-MIPI adapter board. For details on the 4000-MIPI and Video Input Boards, see ICD-OEM-Camera Side- Interfaces.

This manual is also suitable for:

1750-oem

Table of Contents