Advertisement
Quick Links
Advertisement
Related Manuals for Erbauer ERB404SDR
Summary of Contents for Erbauer ERB404SDR
- Page 1 ERB404SDR 240W 1/4 SHEET SANDER...
- Page 2 Original Instructions (Version 2.0)
- Page 3 Congratulations on your purchase of a quality power tool from Erbauer (UK) Ltd. This product should give you reliable service but for your peace of mind this power tool does carry a 2 year guarantee, the terms of which are detailed below.
-
Page 4: General Power Tool Safety Warnings
GENERAL POWER TOOL SAFETY WARNINGS Warning: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your electric (corded) power tool or battery-operated (cordless) power tool. - Page 5 use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3. Personal safety a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
- Page 6 b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
- Page 7 dusts can endanger the health of operator and bystanders. Always use eye glasses and dust mask. 2. Hearing protection should be worn when using the sander. 3. Always wear safety glasses or eye shields when using the sander. Everyday eyeglasses have only impact-resistant lenses;...
- Page 8 Warning: Some dust particles created by power sanding, sawing, grinding, drill and other construction jobs contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks and cement and other masonry products. •...
- Page 9 This tool may cause hand-arm vibration syndrome if its use is not adequately managed. Warning: identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).Note The use of other tools will reduce the users’...
- Page 10 SYMBOLS To reduce the risk of injury, user must read instruction manual Warning Double insulation Wear ear protection Wear eye protection Wear dust mask Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
- Page 11 240W 1/4 SHEET SANDER...
- Page 12 ON-OFF SWITCH PALM GRIP HANDLE SOFT GRIP DUST COLLECTION OUTLET BASE PLATE CLAMP LEVER LOCK SAND PAPER CLAMP CLAMP LEVER PAPER PUNCH SANDING PAPER (See Fig. 1-1) DUST BAG (See Fig. 3-1)
-
Page 13: Technical Data
TECHNICAL DATA Voltage 230-240V~50Hz Power input 240W No-load speed 14000/min Dimension of base 103 X 110mm Orbital dia 1.6 mm Protection class Machine weight 1.3 Kg NOISE INFORMATION A weighted sound pressure : 77 dB (A) =3.0 dB (A) A weighted sound power : 88 dB (A) =3.0 dB (A) Wear ear protection when sound pressure is over... - Page 14 OPERATING INSTRUCTIONS Note: Before using the tool, read the instruction book carefully. 1.CHANGING THE SANDING PAPER (See Fig. 1-1, 1-2) To remove the sanding paper, lift up the clamp lever (8) and move away from the clamp lever lock (6). The sanding paper clamp (7) is now loose.
- Page 15 without the dust box/bag properly installed. Empty dust bag (See Fig. 3-1, 3-2) For more efficient operation, empty dust bag every 5-10mins. This will permit the air to flow through the bag better. To empty the dust bag, remove it from the dust extraction port, shake out dust.
- Page 16 the sanding finish. Start your sander before sanding and turn it off only after you stop sanding. For the best results, sand wood in the direction of the grain. Do not start sanding without having the sandpaper fitted. Do not allow the sandpaper to wear away it will damage the base-plate.
-
Page 17: Troubleshooting
TROUBLESHOOTING 1. If your sander will not operate, check the power at the mains plug. 2. If the sander does not abrade surface, check the sanding paper. If the sanding paper have been worn, replace the new paper and try again. The paper must be kept in a dry place;... -
Page 18: Plug Replacement
PLUG REPLACEMENT (UK & IRELAND ONLY) If you need to replace the fitted plug then follow the instructions below. IMPORTANT The wires in the mains lead are colored in accordance with the following code: BLUE =NEUTRAL Brown = Live As the colors of the wires in the mains lead of this appliance may not correspond with the colored markings identifying the terminals in your plug, proceed as follows. - Page 19 EN 55014-2 EN 61000-3-2 EN 61000-3-3 EN 60745-2-4 EN 60745-1 Authorised Signatory and technical file holder Date: 10/02/15 Signature: Name / title: Peter Harries / Quality Manager Erbauer (UK) Ltd. Trade House, Mead Avenue, BA22 8RT 240W 1/4 SHEET SANDER...