Related Manuals for Erbauer ERB406
Summary of Contents for Erbauer ERB406
- Page 1 WARRANTY YEARS ERB406 SHEET SANDER SFX-ERB406-M-050608.indd 1 2005-6-8 14:49:53...
- Page 2 SFX-ERB406-M-050608.indd 2 2005-6-8 14:49:54...
- Page 3 This guarantee does not affect your statutory rights.This guarantee is only valid in the UK. For further technical advice, spare parts or repair service (outside of guarantee) please contact the customer helpline number on 0845 607 6380 SHEET SANDER SFX-ERB406-M-050608.indd 3 2005-6-8 14:49:54...
-
Page 4: Safety Instructions
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or SFX-ERB406-M-050608.indd 4 2005-6-8 14:49:54... - Page 5 2.Ensure your mains supply voltage is same as indicated on the rating plate. 3.Your tool is double insulated for additional protection against a possible electrical insulation failure within the tool. 4. After long working periods external metal parts and accessories could be hot. SHEET SANDER SFX-ERB406-M-050608.indd 5 2005-6-8 14:49:55...
- Page 6 Goggles / Safety Spectacles, Ear defenders (essential with tools with a noise rating of over 85 dbA), Gloves and face masks. In all cases ensure that the safety equipment is in good condition. SYMBOLS Read the manual Wear gloves Warning Wear dust mask,eye & ear protection SFX-ERB406-M-050608.indd 6 2005-6-8 14:49:55...
- Page 7 � � � �� � � � � ON-OFF SWITCH SWITCH LOCK-ON BUTTON VARIABLE SPEED CONTROL DIAL HAND GRIP AREA BASEPLATE SANDING PAPER CLAMP CLAMP LEVER LOCK CLAMP LEVER DUST BAG 10. PAPER PUNCH SHEET SANDER SFX-ERB406-M-050608.indd 7 2005-6-8 14:49:56...
-
Page 8: Technical Data
Wear ear protection when sound pressure is over 85dB (A) Typical weighted vibration 4.16m/s ACCESSORIES Use 1/2 sheet sanding paper of the following size: 113 x 280mm Dust bag Paper punch Sanding sheets 3pcs (60grit, 80grit, 100grit) SFX-ERB406-M-050608.indd 8 2005-6-8 14:49:57... - Page 9 Position the punch (10) over the baseplate (5) with the punch sides on the edges of the baseplate (See Fig 4). Press the punch Fig 3.2 SHEET SANDER SFX-ERB406-M-050608.indd 9 2005-6-8 14:49:58...
- Page 10 Use coarse grit paper to sand rough surfaces, medium grit for smooth surfaces and fine grit for the final surfaces. If necessary, first make a test on Fig 6 SFX-ERB406-M-050608.indd 10 2005-6-8 14:49:59...
-
Page 11: Maintenance
ENVIRONMENT PROTECTION Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. SHEET SANDER SFX-ERB406-M-050608.indd 11 2005-6-8 14:50:00... -
Page 12: Plug Replacement
L. A 13AMP (BS1363 or BS1363/A) plug must be used and a 3 AMP fuse must be fitted. 3 AMP FUSE BLUE N (NEUTRAL) BROWN L (LIVE) OUTER CABLE GRIP SLEEVE SFX-ERB406-M-050608.indd 12 2005-6-8 14:50:00... - Page 13 98/37 EC –Machinery Directive Standards and technical specifications referred to: EN 60745-1:2003/+A1:2003 EN 60745-2-4:2003 EN 55014-1:2000/+A1:2001 EN 55014-2:1997/+A1:2001 EN 61000-3-2:2000 EN 61000-3-3:1995/+A1:2001 Authorised Signatory Date: 03/15/05 Signature: Name: Peter Harries Screwfix Direct Ltd Quality Manager 2005 SHEET SANDER SFX-ERB406-M-050608.indd 13 2005-6-8 14:50:01...
- Page 14 SFX-ERB406-M-050608.indd 14 2005-6-8 14:50:01...
- Page 15 SHEET SANDER SFX-ERB406-M-050608.indd 15 2005-6-8 14:50:01...
- Page 16 SFX-ERB406-M-050608.indd 16 2005-6-8 14:50:01...
Need help?
Do you have a question about the ERB406 and is the answer not in the manual?
Questions and answers