Remote Control Programming/Replacement - Code Alarm PROFESSIONAL CA 1045 Owner's Manual

Vehicle security and keyless entry system

Hide thumbs Also See for PROFESSIONAL CA 1045:

Table of Contents

Remote Control Programming/Replacement

Turn the ignition ON.

Press and hold the valet/override button.

Within 10 seconds the system will chirp (3) three times.

Press 1 button of each transmitter you wish to program.

The system will respond with 1 chirp for each accepted transmitter.

Turn the ignition OFF.

NOTE: The system will exit transmitter programming after 15 seconds of inactivity.

NOTE: This system has 1 button programming which programs all channels of the

remote to the system.

NOTE: The system will hold up to 4 transmitters in memory, programming a 5th

transmitter will erase the oldest transmitter in memory.

ca1045 Owners revA

Table of Contents

Do you have a question about the PROFESSIONAL CA 1045 and is the answer not in the manual?