Table of Contents
Advertisement
2. OPERATING THE JABLOTRON 100 SYSTEM
Once logged into the account, the system will display all active devices which can be monitored or controlled.
The "Overview" menu includes "Section", and "Automation (PG)" tabs.
Depending on the type of detectors used, the menu may also include tabs like
"Thermostats and thermometers", "Meters" "History" and "Gallery".
Tabs:
a
Sections – enables you to view and operate all sections in the system.
a
Keypads – enables you to view all virtual keypads the way they are installed
in the premises. It is possible to control them by clicking on a segment just like
pressing a segment button on the real keypad. You will be asked you to enter
an authorization code upon the fi rst request to control the system. While you are
logged in, subsequent actions will not require repeated authorization.
a
Automation (PG) – enables you to view all programmable system outputs.
a
Thermostats and thermometers – allows you to view the current temperatures
and history graphs from a list of used thermostats and thermometers. Depending on the confi guration,
it is possible to regulate temperature in the building.
a
Meters – an overview of all installed meters (electricity, gas and water).
a
Gallery – enables you to take snapshots with any installed camera verifi cation devices, or look at past photos
and video sequences taken by these devices.
The bottom of the home page has an overview of the most recent system events.
MyJABLOTRON offers free notifi cations (via SMS, e-mail, or push notifi cations) for selected system
section events, programmable outputs, thermometers or meters. These notifi cations can be set up
in the "Settings" menu.
Each system can have only one main user with Administrator rights (owner). This user has the right
to share a whole building or its selected parts (single sections, PG outputs, photo verifi cation and
measuring devices) with other users whose MyJABLOTRON accounts will be created automatically after
the system sharing is confi gured. If a user already has a MyJABLOTRON account, the shared installation will
appear in the user's dashboard as another active device. Notifi cation of shared access will be sent, along with
the password, to the e-mail address (login name) of the new user.
MyJABLOTRON - LITE version
Depending on your country (or region) customers may be able to create an account and/or services
in the LITE version of MyJABLOTRON web app.
The LITE service is limited in functionality and minimizes demands for data transfer. LITE is based
on the PROFI version with some modifi cations:
The LITE version in comparison with PROFI version:
a
Doesn't maintain a constant connection with a control panel
a
Establishing connection takes approx. 1 minute
a
The current status appears after successful connection
a
Controlling the system (sections or PG outputs) is possible after successful connection
a
The event history is not available
a
The system doesn't send event notifi cations (SMS, email, push messages)
a
Virtual system keypads are not available
a
A detector's photo gallery and photos upon request are not available
a
Thermometers, electricity meters and other supported automation devices are not displayed
A password will be sent to the user's e-mail address, which also serves as a login name.
The password can be changed at any time in the settings.
Once logged into the account, the system shows all active devices that can be monitored or controlled,
depending on the registered version of MyJABLOTRON (PROFI or LITE).
19
Advertisement
Table of Contents
