Advertisement
FIT AND SECURE
2
2.1
3
2.2
A
B
2.3
VACC120_REV_A00
2
4
6
5
2
Insert the M6 x 12 button head bolts (Item 3)
and M6 x 12 x 1 Flat washers (Item 4) into
the side brackets (Item 2) as shown but do
not thread all the way.
Remove the rear grab handles in the vehicle
by removing two mounting screws. Fit
the side brackets (Item 2) using the grab
handle mounting points. The side brackets
can either be fitted using the M6x16 Button
Head Bolts (Item 5) and the M6 x19 x 1 Flat
Washers (Item 6) as seen in Fig 2.2A, or it
can be mounted by refitting the grab handle
as seen in Fig 2.2B.
The slot in the side brackets allows for
adjustment of the tray towards the front
or rear of the vehicle. Use the indication
markers on the side bracket as reference
points to ensure that the left and right hand
brackets are aligned.
With the Front Runner sticker facing the
rear of the vehicle, align the mounting slots
on the Internal Cargo Tray (Item 1) with the
M6x12 Button Head Bolts and slide the tray
into position as seen in Fig 2.3.
Tighten the M6x12 Button Head Bolts.
3
© 2022 FRONT RUNNER VEHICLE OUTFITTERS
Advertisement
