Section 2 - Hardware; Unpacking And Inspection; Included Items - Omega DTG-RTD100 Series User Manual

Section 2 – Hardware
It is important that you read this manual completely and follow all safety
precautions before operating this instrument.
2.1 Unpacking & Inspection
Remove the packing list and verify that you have received all your equipment.
If you have any questions about the shipment, please call our Customer Service
Department at 1-800-622-2378 or 203-359-1660. We can also be reached on the
Internet at www.omega.com, e-mail: cservice@omega.com. When you receive
the shipment, inspect the container and equipment for any signs of damage.
Note any evidence of rough handling in transit. Immediately report any damage
to the shipping agent.

2.2 Included Items

The following items are supplied in the box.
• 1 DTG-RTD100 Thermometer Assembly
• 1 Quick Start Guide
• 1 USB Programming Cable
• 1 Setup Utility Software Disk
• 1 Analog Output Cable
• Lithium Batteries (1 for Standard Model, 2 for Wireless Model)
(Omega Replacement Part No. BATT-C-3.6V)
• Wireless Antenna (Wireless Model Only)
• Antenna Housing (Wireless Model Only)
The carrier will not honor any damage claims unless all
shipping material is saved for inspection. After examining
and removing contents, save packing material and carton in
the event reshipment is necessary.
Hardware
NOTE:
2
2-1