Safety Instructions For Maintenance - Bartscher A150.114G Instruction Manual

Cleaning the heating plate
o After it cools, the unit may be cleaned. Cover the frame with a hand, so that water
does not get inside.
o Remove any scraps of food using a paper cloth. If they cannot be easily removed,
pour a small amount of water into the heating plate and turn the thermostat to ON.
The plate will heat up and become easier to clean.
o Clean the heating plate with a soft, moist cloth
or sponge and a mild cleaning agent.
o Do not clean the plate when it is hot.
This can damage the unit or cause fire.
o Do not use nylon brushes when cleaning the unit.
This can damage its surface.
o After drying, place a thin layer of cooking oil on the plate's surface.
Cleaning the cover
o Clean the unit's cover with a soft cloth or sponge and mild cleaning agent. Rinse
with clean water and dry thoroughly with a soft cloth
Never use solvents, gasoline, abrasive chemicals or chemical brushes as
they can damage the unit's surface.
After cleaning, wipe the unit dry or turn it on for a short while to dry.
Ensure that the unit has been properly cleaned prior to storing it in a dry place.

6.3 Safety instructions for maintenance

o Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o When you encounter damages or failures contact your specialist dealer or our
customer service.
o Only qualified experts may perform repair and maintenance work on the device
using original replacement and accessory parts. Never attempt to repair the
device yourself!
- 29 -