Getting Started - Siemens SXG75 User Manual

Siemens sxg75: user guide
Hide thumbs Also See for SXG75:
Table of Contents

Advertisement

8

Getting started

Getting started
Your phone's display is supplied with
a protective film. Remove this film
slowly before using the phone.
In rare cases, static discharge may
cause discolouration at the edges of
the display. However, this will disap-
pear within approx. 10 minutes.
Inserting the SIM card/
battery
The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored. If
the SIM card has been delivered in
credit-card size, snap the smaller
segment out and remove any rough
edges.
• Place the SIM card in front of the
slot with the contact surface fac-
ing downwards. Then press the SIM
card slightly to push it in (ensure
that the chamfered corner is in the
correct position).
• Insert the battery sideways into
1
the phone
2
wards
until it engages.
• To remove, press the retaining tab
on the side of the battery, then lift
the battery out.
• Place the cover in position, then
push it towards the front in the di-
rection indicated by the arrow, un-
til it clicks into place.
Please switch off your phone before re-
moving the battery!
, then press it down-

Advertisement

Table of Contents
loading

Table of Contents