Siemens SXG75 User Manual page 25

24 Calling
Add to
contacts
Not during video calls:
Hold call
Swap
Conference
Drop
Private
DTMF
Only during video calls:
Mute video
Pause inc./
Pause outg.
Switch
camera
Full/splt
screen
Select To a new contact/
To exist. contact. Select
number type to store the
number in the contacts.
Confirm save command
with C.
Hold current call.
Swap between calls.
(see page 22)
End a call in a confer-
ence.
Make private call in a
conference.
Enter tone sequences
(numbers) for remote in-
quiries to an answering
machine.
If switched off, the incom-
ing video is muted and
the video mute picture is
sent (Select image,
page 45)
Pause the incoming vid-
eo (of the other party) or
outgoing video (yours).
The menu entry changes
to Resume inc./
Resume outg.
Switch between front and
rear camera.
Select the video presen-
tation on your display.
Frame rate
White balance
Flicker
adjustm
Send picture/
Send video
Tone sequences (DTMF)
You can enter control codes (num-
bers) for remote access to an auto-
matic answering machine while an-
other connection exists. These inputs
are transmitted directly as
DTMFcodes (control codes).
Adjust how many frames
per second the camera
will capture.
Adjust the sensitivity to
light.
Adjust the sensitivity to
indoor lightening flicker
rate.
Select a picture/video
from My stuff and show it
to the person on the other
end of the line.