The numbers in brackets refer to the components shown in Machine Description chapter. The purpose of this Manual is to provide the operator with all the information to get the best performances from Nilfi sk SM 800. Before operating the machine, read carefully the following information.
1,300 x 820 x 1,030 mm Main broom size (diameter x length) 150 x 450 mm Side broom diameter 260 mm Collection tank capacity 34 L (theoretical) - 19 L (actual) Machine total weight 16 kg SM 800 1464202000(1)2009-11 A...
The manufacturer is not responsible for damages coming from unauthorised machine modifi cations. WARNING! The machine is not suitable to collect fl ammable, explosive, poisonous, carcinogen and harmful substances or materials. 1464202000(1)2009-11 A SM 800...
Clean the brooms and remove any lace, wire, strings or similar, which can compromise the machine effi ciency and cause damages due to the drive system sticking. – Periodically check the side brooms for wear and replace them when the bristle length is reduced to 1/3. SM 800 1464202000(1)2009-11 A...
Pay attention to the proper position of the long driving belt (D, Fig. 1). • Turn the 2 knobs (7) on the position 1. After installation, check the sweeper operation by testing the rotation direction of the brooms (13). Figure 2 1464202000(1)2009-11 A SM 800...
• Install the driving belt (F, Fig. 4) as shown. • Turn the knobs fully clockwise. After installation, check the sweeper operation by testing the rotation direction of the brooms (14). Figure 3 Figure 4 SM 800 1464202000(1)2009-11 A...
The machine speed is too high. Reduce the working speed. The machine leaves dust marks. Some dust may collect inside the housing Remove the dust from the housing. behind the brooms. SCRAPPING Have the machine scrapped by a qualifi ed scrapper. 1464202000(1)2009-11 A SM 800...