Advertisement

Electronic Service
Manuals
This electronic document is provided as a service to our custom-
ers. We do not create the contents of the information contained in
this document. Should you have detailed questions pertaining to
the information contained in this document, you may contact Michco,
or the manufacturer which provided the original information in this
electronic deliverable. Michco's only part in this electronic deliver-
able was the electronic assembly process.
You may contact Michco through the following methods:
Phone (517) 484-9312 or (800) 331-3339 MI, OH, IN only
2011 N. High St. -- Lansing, Michigan -- 48906
Fax: (517) 484-9836
Email: CustServ@Michco.com
Web site: www.Michco.Com
Parts Web site: www.FloorMachineParts.Com
Order Parts on Line at:
www.FloorMachineParts.Com
Directly to Parts & Service:
By Email:
Shop@Michco.com
By Fax: (517) 702-2041
By Voice: Use numbers above.
Serving the Cleaning Industry Since 1922
Notice: All copyrighted material remains property of original owners, all trademarks are property of respective
owners. Manuals are subject to Manufacturer's reproduction limitations. Originals or reproductions were provided
by manufacturers through a request. We make no warranty as to the correctness of information provided in this
document and you assume all risk.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Shadow 17 and is the answer not in the manual?

Questions and answers

Summary of Contents for Nilfisk-Advance Shadow 17

  • Page 1 Electronic Service Manuals This electronic document is provided as a service to our custom- ers. We do not create the contents of the information contained in this document. Should you have detailed questions pertaining to the information contained in this document, you may contact Michco, or the manufacturer which provided the original information in this electronic deliverable.
  • Page 2 OPERATOR A N D P A R T S L I S T Shadow™ 17, 20 Models 56201101, 56201102, 56201355 56201250, 56201586 3/96 reivsed 2/00 Form Number 56041342...
  • Page 3: Technical Specifications

    TECHNICAL SPECIFICATIONS Model Shadow™ 17 Shadow™ 20 Model Number 201101 201102 Motor 1.25 hp, 120V 1.25 hp, 120V Transmission Dual-Planetary Dual-Planetary Pad/Brush Speed 175 rpm 175 rpm Pad/Brush Size 17” (43 cm) 20” (51 cm) Wheels 5” (15 cm) 5” (15 cm) Cord Length 50’...
  • Page 4: Table Of Contents

    TABLE OF CONTENTS PAGE INTRODUCTION ..............2 IMPORTANT SAFETY INSTRUCTIONS ......... 3 IMPORTANTES MESURES DE SÉCURITÉ ......4 GROUNDING INSTRUCTIONS ..........5 MACHINE ASSEMBLY ............6 PREPARING THE MACHINE FOR USE........7 OPERATING CONTROLS ............8 OPERATION................9 AFTER USE ................10 TROUBLESHOOTING ............
  • Page 5: Introduction

    INTRODUCTION This manual will help you get the most from your Advance Shadow™ Floor Machine. Read it thoroughly before operating the machine. This product is intended for commercial use; polishing, spray buffing, scrubbing, stripping and rotary carpet shampooing. PARTS AND SERVICE Call the DEALER named below for repair parts or service.
  • Page 6: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using. WARNING! To reduce risk of fire, electric shock, or injury: Do not leave the appliance when it is plugged in. Unplug the unit from the outlet when not in use and before servicing. To avoid electric shock, do not expose to rain.
  • Page 7: Importantes Mesures De Sécurité

    IMPORTANTES MESURES DE SÉCURITÉ L’utilisation d’un appareil électrique demande certaines précautions: LIRE TOUTES LES INSTRUCTIONS AVANT DE FAIRE FONCTIONNER (CET APPAREIL) AVERTISSEMENT: Pour réduire les risques d’incendie, de choc électrique ou de blessure: Ne pas laisser l’appareil sans surveillance lorsqu’il est branché. Débrancher lorsque l’appareil n’est pas utilisé et avant l’entretien.
  • Page 8: Grounding Instructions

    GROUNDING INSTRUCTIONS This appliance must be grounded. If it should electrically malfunction, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
  • Page 9: Machine Assembly

    MACHINE ASSEMBLY Handle to base, tools needed; (2) 9/16” open end or combination wrenches. Unpack the supplied hardware and become familiar with the part assembly by studying Figure 1. Install the (2) “K” bushings into the base housing support ears as shown. Position the Handle Tube “J”...
  • Page 10: Preparing The Machine For Use

    PREPARING THE MACHINE FOR USE WARNING! This machine contains moving parts. To reduce the risk of injury, always unplug the power cord before servicing. INSTALLING THE BRUSH OR PAD HOLDER Align the lugs with the corresponding slots in the brush or pad holder and turn the brush or pad holder counterclockwise to lock it in place.
  • Page 11: Operating Controls

    OPERATING CONTROLS 1 Operator Handle Grips 2 Switch Lever Safety Lock Button 3 Switch Levers - Squeeze - ON / Release - OFF 4 “Quick-Loc” Handle Adjustment Lever 5 Power Cord 6 Operator Handle 8 - FORM NO. 56041342 / SHADOW ™...
  • Page 12: Operation

    OPERATION Unwrap the Power Cord and plug it into a properly grounded outlet. Loosen the foot operated “Quick-Loc” lever with the toe of your foot by pulling up on the bottom of the lever. Move the Operator Handle downward until your arms are almost straight. Then step down on top of the lever to lock it. Lift the Handle until the brush (or pad) is flat against the floor.
  • Page 13: After Use

    AFTER USE Unplug the Power Cord, coil it and hang it from the Operator Handle Grips. Remove the pad holder or brush from the machine. Clean the pad or brush and hang it up to dry. Allow buffing pads to dry completely before using again. Store brushes and pad holders separate from the machine.
  • Page 14: Troubleshooting

    TROUBLESHOOTING SWIRLS ON THE FLOOR AFTER SCRUBBING • Floor not clean. • Incorrect solution. • Area not properly swept - debris in pad or brush. • Improper pad or brush for the job. • Moving the machine too fast. SWIRLS ON THE FLOOR AFTER DRY BUFFING •...
  • Page 15 FRONT 12 - FORM NO. 56041342 / SHADOW ™ 17/20 revised 2/00...
  • Page 16: Handle System

    HANDLE SYSTEM Item Ref. No. Description 56002098 Wsh, Flt SAE 1/4 56002506 Scr, Hex Hd 3/8-16 x 5.00 56002769 Nut, Hex Nyl Loc 3/8-16 56002777 Scr, Hex Hd 3/8-16 x 7.00 56201068 Wire Assembly (230V) 56201023 Spacer 56009195 Wsh, Flt .40 x 1.25 x .16 56009196 Wsh, Flt Hardened .40 x 1.00 x .16 56014828...
  • Page 17 FRONT 14 - FORM NO. 56041342 / SHADOW ™ 17/20 revised 2/00...
  • Page 18: Base System

    56201055 Shroud, Motor (120V) 56505539 Soft-Touch™ Shampoo Brush 17 56486116 Grommet (120V) 56505540 Soft-Touch™ Shampoo Brush 20 56016480 Decal, Shadow 17 56506006 Clutch Plate for Above Brushes 56016479 Decal, Shadow 20 56393567 “Big Mouth” Pad Retainer 56201075 Weight Kit, 17"...
  • Page 19 FRONT 16 - FORM NO. 56041342 / SHADOW ™ 17/20...
  • Page 20 SOLUTION TANK KIT Item Ref. No. Description 56201050 Solution Tank Kit (includes everything below) 56040562 Instruction Sheet 56201004 Solution Tank Assembly (#1-15) 56001939 Wsh, Flt SAE 5/16 56002826 Nut, Hex Nyl Loc-Thin 5/16-18 56002884 Scr, Hex Hd SS 5/16-18 x 1.25 56009217 Nut, Hex Flange Loc 5/16 56201005...
  • Page 21 Nilfisk-Advance, Inc. 14600 21st Avenue North Plymouth, MN, 55447-3408 www.nilfisk-advance.com Phone: 800-989-2235 Fax: 800-989-6566 ©2000 Nilfisk-Advance, Inc., Plymouth, MN 55447-3408 Printed in the U.S.A.

This manual is also suitable for:

Shadow 20

Table of Contents