L2Tp Settings - D-Link DIR-840 User Manual

Wireless n600 vpn router

Hide thumbs Also See for DIR-840:

Table of Contents

Section 3 - Configuration

L2TPv3 uses UDP protocol to transport the PPP data. This is often encapsulated in IPsec encryption instead of MPPE.

L2TP:

Check this box to enable L2TP VPN settings.

Multi-SSID 1-4:

You can establish VPN settings on multiple SSIDs by enabling

each of them here.

Host Name:

Enter a name for your VPN.

Connection Type:

Select L2TPv3 or L2TPv3.over.IPsec.

Remote Address:

Enter the IP address of the remote LCCE.

Remote Host

Name:

Enter the name of the remote LCCE.

Remote Router

ID:

Enter the router ID of the remote LCCE.

Local Router ID:

Enter the router ID of the local LCCE.

D-Link DIR-840 User Manual

L2TP Settings

Table of Contents