Silvercrest 77419 Operating Instructions Manual page 120

Saving own codes
On up to 200 memory slots you can save your own foods and their nutritional
values, and give them a code number (codes 800 - 999). The values you input
will each refer to 100 grams of food.
You can fi nd the nutritional values of foods on their individual packaging or in
specialist literature.
For this proceed as follows:
1) Press the button ON/OFF TARE
appears briefl y, then "0 g" is indicated automatically.
2) Press the button
3) Enter the desired code number, between 800 - 999, and then confi rm it with
the button
4) Now enter the nutritional value of the food:
NOTICE
► The following maximum values can be entered:
–
–
–
SNAW 1000 A1
for about 3 seconds until "Code 0" blinks in the display.
de
M+ .
Kilocalories
0 - 65534
Kilojoules
0 - 65534
Kj
Cholesterol
0.0 - 6553.4
Bread units
0.0 - 655.34
Carbohydrates 0.0 - 6553.4
Fats
0.0 - 6553.4
Protein
0.0 - 6553.4
First, the display blinks: enter the kilocalories and confi rm the entry
with the button M+ .
the display blinks: enter the kilojoules and confi rm the entry with
Kj
the button M+ .
the display blinks: enter the cholesterol content in milligrams and
confi rm the entry with the button
to switch the scales on. The start display
M+ .
GB
117