Table of Contents
Advertisement
Camera menu items
■
Others 2/4 screen
### Others 2/4 ###
Zoom Mode
Max Digital Zoom
Image Stabilizer
Tally
IR Control
IR ID
Return
Zoom Mode
[Opt.Zoom, i.Zoom, D.Zoom, D.Extender]
Configure the maximum zoom magnification.
Opt.Zoom: Use only the optical zoom. Up to 22x optical
zoom is possible.
i.Zoom:
Enable the i.Zoom function.
Enabling this function allows you to perform
electronic zoom while reducing drops in
picture quality.
Combining optical zoom and electronic
zoom, up to 30x zoom is possible.
D.Zoom:
Enable the digital zoom function.
Picture quality degrades as zoom increases
with digital zoom.
D.Extender: Enable the digital extender function.
When this function is enabled, you can
perform optical zoom while maintaining a
fixed digital zoom magnification. Smooth
zooming operations will be possible at the
cost of slight degradation in the image
quality.
Max Digital Zoom [x2 to x16]
Set the maximum digital zoom magnification.
This is only enabled when Zoom Mode is set to "D.Zoom".
(continued)
D.Zoom
×16
Off
Enable
Enable
CAM1
Image Stabilizer [Off, On]
Turn the digital image stabilization function off/on.
Notes
● The field of view will be narrower when the image
stabilization function is active.
● When "On" is selected, video will be delayed by
1 frame.
● When switching between "On" and "Off", the
image may go black and the audio may be muted
temporarily.
● Image stabilization cannot be performed while
Frame Mix is active.
● The effect of the image stabilization function is
reduced in low-light environments.
● The unit's image stabilizer function detects
movement from the image signal and performs
correction. Depending on the shooting conditions,
the function may not be able to differentiate between
movement of the subject and movement of the unit,
resulting in correction errors.
Tally [Disable, Enable]
"Enable" or "Disable" is set here for the function which
turns on or turns off the tally lamp using the tally control
signal.
47
Advertisement
Table of Contents
