Table of Contents
Advertisement
Camera menu items
■
Picture 2/3 screen
*** Picture 2/3 ***
Detail
Detail Level H
Detail Level L
Flesh Tone Mode
HDR
DRS
E.DRS
Return
Detail [Off, Low, High]
The image detail (image sharpness) is adjusted here.
When "Low" or "High" is selected, the detail is enhanced.
Detail Level H
[Detail Level L setting +1 to 18]
The image sharpness level is adjusted here when "High"
has been selected as the "Detail" setting.
Detail Level L
[1 to Detail Level H setting –1]
The image sharpness level is adjusted here when "Low"
has been selected as the "Detail" setting.
Flesh Tone Mode [Off, Low, High]
Set here is the flesh tone mode for displaying the subjects'
skin so that it appears more smoothly and eye-pleasingly.
When "Low" or "High" is selected, the effect is enhanced.
HDR [Off, Low, High]
Adjust the effect of the high dynamic range mode.
When HDR is set to "Low", correction is performed so
that the appropriate exposure is obtained for the light and
dark areas on subjects with extremely high contrast. When
"High" is selected, dark areas are made brighter.
Depending on the shooting conditions, however, the
picture quality may drop with increased noise.
In addition, unit vibration may result in blurry or distorted
images.
This effect is not recommended in shooting locations
where significant vibration may occur.
40
(continued)
Low
18
9
Off
Off
Off
Off
Notes
● When the HDR setting is changed, the monitor
images will go momentarily black and the audio will
be muted. Furthermore, IP video may stop for about
30 seconds.
● When "Low" or "High" is selected, it will take longer
for the brightness of the image to converge.
● When "Low" or "High" is selected, brightness cannot
be adjusted.
● When "Low" or "High" is selected, video will be
delayed by 4 frames.
● When "Low" or "High" is selected, the following
settings cannot be changed.
• Day/Night
• Night-Day Level
• Pedestal
• DRS
• Gamma Type
• Back Light COMP.
• Freeze During Preset
• Image Stabilizer
● When "Low" or "High" is selected, the OSD menu
cannot be displayed for the video on the Web
screen. However, the OSD menu can be displayed
over video output to a monitor.
● When the Priority Mode (page 44, page 65)
selection is "NDI|HX", this item is fixed to "Off".
DRS [Off, Low, High]
Set here is the DRS function which provides just the right
amount of compensation when images with significant
light/dark differences are displayed.
When "Low" or "High" is selected, the effect is enhanced
even more.
Depending on the shooting conditions, however, the
picture quality may drop with increased noise.
Advertisement
Table of Contents
