Layer Area; Input Area - Magnimage LED-W4000 User Manual

the system will not automatically return to the default state, such as user
mode shortcut interface, test pattern interface, etc.
LAYER area：
This area includes 6 buttons, LAYER 1, LAYER 2, LAYER 3, LAYER 4, FULL
SCREEN and QUICK LAYOUT.
LAYER 1-4 corresponds to the 4 layers of the machine. Short press the button
to select the screen. Press and hold the button to open or close the
corresponding layer. The used one is on white, and the current selection is on
red.
FULL SCREEN: Allows the currently selected layer to be full-screen with one
button in the corresponding output port;
QUICK LAYOUT: Long press for 3 seconds to directly change to matrix output
mode.
INPUT area：
This area includes 11 buttons: INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5
LEFT, INPUT 5 RIGHT, INPUT 6 LEFT, INPUT 6 RIGHT, TILE 1, TILE 2, LOGO.
Among them, INPUT 5 LEFT, INPUT 5 RIGHT, INPUT 6 LEFT, INPUT 6 RIGHT
correspond to the processor's two expanded inputs. DP1.2 and HDMI2.0 will
be divided into left and right parts when using inputting 4K×2K/60Hz input,
which corresponding to the LEFT and RIGHT of the button.
TILE 1 and TILE 2: Quick use Tile signal, specific operating please see Tile Key
configuration menu.
INPUT MUX: Shortcut button to INPUT MUX menu, configure input 1-6
separately (each group use which input port).
LOGO button: Open and close logo function.
When there is a input signal, the corresponding input key turn white. The
currently selected input signal is red.
Select layer first, and then select the input signal.
16