Table of Contents
Advertisement
Bottom view
1
I
L
TEM
ABEL
1.
Tilt adjustor
2.
Ceiling support holes
Note:
When installing, ensure that you use only UL Listed ceiling mounts.
For ceiling installations, use approved mounting hardware and M4 screws with a maximum screw
depth of 8 mm (0.31 inch).
The construction of the ceiling mount must be of a suitable shape and strength. The ceiling mount
load capacity must exceed the weight of the installed equipment, and as an additional precaution
be capable of withstanding three times the weight of the equipment over a period of 60 seconds.
235.0mm
50.0mm
70.0mm
D
ESCRIPTION
Rotate adjuster lever to adjust angle position.
Contact your dealer for information on mounting the projector on a
ceiling
– 5 –
DLP Projector—User's Manual
70.0mm
1
70.0mm
S
EE PAGE
12
Advertisement
Table of Contents
