DLP Projector—User's Manual
Setting the OSD Language
Set the OSD language to your preference before continuing.
1. Press the MENU button. Press the cursor ▲▼ button to navigate to Setup. Press
(Enter) or ► to enter the Setup submenu.
2. Press the cursor ▲▼ button until MENU Settings is highlighted. Press
enter the MENU Settings submenu.
3. Press the cursor ▲▼ button to select Language menu. Press
language. Press the cursor ▲▼ button until the language you want is highlighted.
4. Press the MENU button twice to close the OSD.
— 16 —
(Enter) or ► to
(Enter) to display