Sharp AR-C360P Software Installation Manual page 5

Network Installation
Windows (cont'd)
6 Install EFI Fiery Utilities
1. Insert EFI Utilities CD (CD2), into your
CD-ROM drive.
2. Select your language.
3. Click Next to accept the License Agreement.
4. Select your printer model. Click Next.
5. Select Quick Install to install only Command
WorkStation, or, select Custom Install to install
your choice of these EFI tools:
> Command WorkStation
> Fiery Mail Port
> Fiery Printer Delete
> Fiery Downloader
> Fiery ColorWise Pro Tools
If the computer will not be used by an AR-C360P
administrator, Command WorkStation may not be
required.
7 Activating Printer Options
After you have completed the printer driver
installation, you must configure the printer for the
installed options. You can configure the options
manually or, for TCP/IP network connections, you
can use the Two-Way Communication feature to
configure the options automatically.
To Configure Options Manually
1. Click Start → Settings → Printers.
2. Right click the Sharp AR-C360P EFI Fiery icon.
3. Click Properties.
4. Click the Installable Options tab.
NOTE
In PCL emulation, click the Device Options tab
and specify the options installed on the
AR-C360P.
5. Select an installed option from the Available
Options list.
6. Click Add to move the option to the Installed
Options list.
7. Click Apply. Click OK.
To Configure Options Automatically
If you have a TCP/IP-enabled network, you can
automatically update your printer driver to reflect
the options currently installed on the printer.
1. Click Start → Settings → Printers.
2. Right click the Sharp AR-C360P EFI Fiery icon.
3. Click Properties.
4. Click the Installable Options tab.
5