Sharp AR-C360P Software Installation Manual page 28

Application Notes & Tips
Using the Single Staple Feature
There is a Staple dropdown selection within the
Finishing Properties of the Fiery.
There are 4 single staple options within that
dropdown. The choices are:
• Top Left Horizontal
• Top Left Vertical
• Top Right Horizontal
• Top Right Vertical
Use the following procedure for these choices to
work correctly.
1. Configure the trays for the proper
orientation (SEF or LEF).
2. Select the Page Size within Paper Source to
SEF or LEF.
3. For SEF, select Top Left Horizontal or Top
Right Horizontal.
4. For LEF, select Top Left Vertical or Top Right
Vertical.
Saddle Stitching on Letter Paper
This section explains how to saddle stitch with
Letter size paper, using the Postscript Driver (PS)
and MS Word as an example.
1. Click File then Page Setup.
2. Under Page Setup click on the Paper tab.
3. Choose the correct Paper size. then click Ok.
4. Click File and select Print. The Printer dialog
box appears.
5. Click Printer Properties. The Printer
Properties dialog box appears.
6. Change the following settings under the
appropriate dropdown list.
Paper Source
• Paper Size: Letter SEF (Short Edge Feed)
Finishing
• 2-Sided Printing: Long Edge Binding
• Output Bin: Finisher (Face-down)
• Staple: Saddle Stitch
• Booklet Maker: Standard Booklet
7. The printer is now ready to print.
• Make sure that at least one tray has SEF
paper loaded.
9