Sharp AR-C360P Software Installation Manual page 21

3. Install the metal brackets where the
breakout panels were.
4. Open the face-up stacker (
the flap and press it onto the stacker surface
"
( ).
5. Close the stacker.
!
), then open
2
Step 2: Prepare the Inverter
Before assembling the finisher, you must adjust the
height of the inverter unit to match the finisher:
! Inverter as supplied
" Inverter changed for use with 4-tray
finisher.
1. Unpack the inverter and remove any packing
materials.