Table of Contents
Advertisement
Category
Program Name
Transfer Belt Position Switches the transfer belt to either the B/W side or
Initial Color Balance
Setting
Size Setting for
[EXTRA]
Require Key
Operator Code
Stream Feeding
Mode
Override Sorter Bin
Capacity Limit
Timer Settings
Sleep Mode
Setting
Auto Clear Setting
Preheat Mode
Setting
Message Time
Setting
Enable/Disable
Disabling of Beep
Settings
When Keys Touched
Disabling of Auto
Paper Selection
Disabling of Auto
Tray Switching
Disabling of
Bypass-Tray
in Duplex Copy
Disabling
Deletion of Job
Programs
Disabling of
Document Feeder
Disabling of Duplex
Copying
KEY OPERATOR PROGRAMS
Function
the color side.
Sets the initial color balance settings.
Sets a paper size in each tray with [EXTRA] setting.
Prevents the copier from being started by people
other than key operator.
Enables the stream feeding mode for copying
from the optional document feeder.
Cancels limit control of operation in case of bin
capacity overflow of an optional staple sorter.
Sets a time interval after which the copier enters the
sleep mode after copying is completed.
Sets a time interval after which the copier returns
to the initial settings.
Sets the time that elapses before the copier enters
the preheat mode after copying is completed.
Sets the length of time that messages are displayed.
Enables or disables sounding of beep when keys
are touched.
Prevents automatic paper selection.
Prevents automatic switching between the paper
trays.
Prohibits the use of the bypass tray during
duplex copying. (Duplex copying can be performed
when an optional duplex module is installed.)
Prevents stored programs from being replaced or
deleted.
Prevents the use of the optional document feeder
when it malfunctions.
Temporarily prevents the optional duplex system from
operating when it malfunctions. Allows the use of the
copier but not the duplex system.
Page No.
21
22
22
23
24
24
25
25
26
26
27
27
27
28
28
28
28
5
Advertisement
Table of Contents
