Table of Contents
Advertisement
KEY OPERATOR PROGRAMS
Price/Copy Setting
This program is used to set the price per copy. Four price per copy
values can be set (#1, #2, #3, and #4). As copies are made, the
cumulative cost of the copies is kept in memory.
When the "PRICE/COPY SETTING" key is pressed, the following
display will appear.
14
To change an account number
1.
Press the "CHANGE" key.
2.
Enter the account number to be changed using the
10-key pad.
3.
Enter a new account number.
4.
Press the "ENTER" key.
If a number that is already registered is entered, the message
"THIS NUMBER IS ALREADY USED." will appear. Press the
"OK" key and enter another number.
5.
To change other account numbers, repeat steps 2 to 4.
Press the "OK" key twice to exit the program.
To print all registered account numbers
1.
Press the "PRINT" key.
The copier will start printing. To stop printing after starting,
press the "CANCEL" key.
2.
Press the "OK" key to exit the program.
KEY OPERATOR PROGRAMS
PRICE/COPY SETTING
INPUT NEW UNIT PRICE AND PRESS [ENTER].
USE INTERRUPT KEY FOR DECIMAL POINT.
PRICE CODE
# 1
# 2
# 3
# 4
1.
Enter the new price for price code #1 by using the 10-key
pad and then press the "ENTER" key.
Use the INTERRUPT key for decimal points.
If the "ENTER" key is pressed without entering a value, the
price per copy will not be changed.
OK
PRESENT PRICE
NEW PRICE
80
60
180
90
ENTER
1/2
Advertisement
Table of Contents
