Table of Contents
Advertisement
KEY OPERATOR PROGRAMS
KEY OPERATOR PROGRAMS
COPIER MODE
OTHER FUNCTION
TIMER SETTINGS
SETTINGS
ENABLE/DISABLE
ACCOUNT CONTROL
SETTINGS
AUTO COLOR CALIBRATION
KEY OPERATOR PROGRAMS
ACCOUNT CONTROL
AUDITING MODE
NUMBER OF COPIES PER ACCOUNT
BILLING BY ACCOUNT
RESETTING ACCOUNT
6
CLEAR
CA
ALL
9
C
PROGRAM
P
CLEAR
8
Select the desired category on the touch panel.
5
Example:
OK
If you have selected "PRINTER" in step 4, this step is not needed.
Press the key of the desired program on the touch panel.
6
Example:
OK
For some programs, a check box is displayed to the left of the
1/2
program name. If the box is pressed, a check mark will appear and
the program will be set. If the box is pressed again, the check mark
will disappear and the program will be canceled.
For other programs, the program setting screen of the program
will appear when the program key is pressed.
If
and/or
displayed using these keys.
Follow instructions for the program.
7
If a mistake is made during entry, press the CLEAR (
clear the entry.
To continue with other key operator programs, press the "OK" key
and then select another program.
To exit the key operator program mode, press the CLEAR
8
ALL key.
To select the account control category, press the
"ACCOUNT CONTROL" key.
To see the number of copies per account, press the
"NUMBER OF COPIES PER ACCOUNT" key.
keys are displayed, additional programs can be
) key to
C
Advertisement
Table of Contents
