Table of Contents
Advertisement
For optimum cleaning results, it is
recommended to use the Miele
Cleaning Agent for milk pipework.
The cleaning agent for milk pipework
has been specially developed for use
with Miele Coffee Machines and
prevents subsequent damage.
For each cleaning process, you will
need 2 sticks of the cleaning agent for
milk pipework.
You can order the cleaning agent for
milk pipework from the Miele online
shop, from Miele Service, or from your
Miele dealer.
Clean the milk pipework
display.
Confirm the message with OK.
Follow the instructions in the display.
When
Fill water container with lukewarm
water and cleaning agent up to the
symbol and insert
appears in the display,
proceed as follows.
Making a cleaning solution
Open 2 sticks of the cleaning agent
for milk pipework and empty the
contents into the water container.
will appear in the
Cleaning and care
Fill the water container to the
mark with lukewarm water and stir
the solution.
Follow the instructions for the mixing
ratio carefully. Do not fill the water
container with too little water.
Otherwise, cleaning will be
incomplete.
Replace the water container in the
coffee machine and close the door.
Follow the instructions in the display.
If prompted to do so in the display,
rinse the water container thoroughly
with clean water. Make sure that no
cleaning agent is left in the water
container. Fill the water container with
fresh drinking water.
The cleaning process is finished when
Program finished
appears in the display.
Degreasing the brew unit and
cleaning the interior
Depending on the natural oil content of
the coffee used, the brew unit can
become blocked quite quickly. It must
79
Advertisement
Table of Contents
