Vacuum Diverter Valve Maintenance - Kärcher Chariot 2 iVac 24 ATV Manual

Vacuum Diverter Valve Maintenance

For maintenance and removal of the vacuum diverter
valve follow the steps below.
3
1. Remove hoses from diverter valve.
2. Remove screw and washer (1) on right side of
hinge bracket.
3. Loosen screw on left side to allow tank to rotate to
the left (do not remove screw). This will allow better
access for valve removal.
NOTE: Remove the post filter for easier access.
1
2
86398780 Operator Manual iVac 24 ATV
4. Remove the three (3) screws and washers
retaining the diverter valve assembly to the
console.
5. Gently pull valve assembly from console to avoid
damaging valve.
6. Reverse steps to re-install.
Maintenance
5
4
35