Front panel I/O assembly
Before you start, ensure that you have read "Prerequisite for CRU replacement" on page 60.
Removal steps
1. Remove the following parts if any:
a. "Side cover" on page 64
b. "Optional internal storage drive cage" on page 67
c. "Front fan" on page 86
d. "Upper PCIe fan" on page 87
2. Remove the front panel I/O assembly.
ThinkStation LED and holder
Before you start, ensure that you have read "Prerequisite for CRU replacement" on page 60.
Removal steps
1. Remove the following parts if any:
a. "Side cover" on page 64
b. "Optional internal storage drive cage" on page 67
c. "Front fan" on page 86
d. "Lower PCIe and internal storage drive fan" on page 87
2. Remove the ThinkStation LED.
.
Chapter 7
Hardware removal and installation
91