Table of Contents
Advertisement
• When the computer successfully connects to the selected access point,
the Connected signage will appear in the connected network name
field and the Wireless Network Connection icon (
will change to (
• Entering an incorrect network key or selecting an inappropriate key
index will show the Limited or no connectivity signage in the network
name field and the icon on the taskbar will change to (
the correct network key and/or change the key index referring to the
Changing Security Mode section on page 4-18.
• To establish a new connection to another access point, firstly
disconnect the current connection and then, perform the steps 3 and 4.
(To disconnect the current connection, select the connected access
point in the Wireless Network Connection dialog box and then, click
Disconnect.)
Confirming Status of Wireless Connection
The Wireless Network Connection icon on the taskbar shows the current wireless
connection status.
Icon
To check the connection speed and quality:
1.
Click the Wireless Network Connection icon (
find the icon, click
2.
In the Wireless Network Connection Status dialog box, confirm your connection
status.
• The number of the green signals (
The more signals light on, the better quality is given to the computer.
• When the quality of connection is poor, adjust the distance between the
computer and other devices or the access point you are communicating
with and/or the facing direction of the computer.
3.
Click Close.
).
Connection status
Disconnected
Trying to connect
Being connected
Failed to connect
to show all kinds of icon.
) on the taskbar
). Reenter
) on the taskbar. If you cannot
) shows the connection quality.
4
4-15
Advertisement
Table of Contents
